The Level 3 Motor vehicle service and maintenance technician - light vehicle, and the 79 providers delivering it.
Servicing and repairing light vehicles.
About this apprenticeship
What this apprenticeship covers
Light vehicle technicians diagnose faults, carry out scheduled servicing, and complete mechanical and electrical repairs on cars and light vans. Training covers engine systems, braking, steering, suspension, transmission, and increasingly complex vehicle electronics and diagnostics. Apprentices learn to use manufacturer technical data, interpret fault codes, and work to industry safety standards. By the end of the programme, they are expected to work with a good degree of independence, making informed decisions about repair methods and parts requirements.
Day-to-day responsibilities
A typical week involves carrying out oil and filter changes, brake inspections, tyre replacements, and more involved repairs such as clutch or suspension work. Apprentices use diagnostic equipment to read fault codes and pinpoint electrical or mechanical issues. They liaise with service advisers to update job cards, order parts, and keep customers informed of progress. Work is carried out to time targets within a workshop environment, following manufacturer specifications and health and safety procedures throughout.
Career outlook
Completing this apprenticeship leads naturally to roles such as qualified vehicle technician, MOT tester, or diagnostic technician. From there, progression routes include senior technician, workshop controller, or service manager. Some technicians move into manufacturer technical support or specialist areas such as electric and hybrid vehicle systems, which are growing areas of demand. Employers range from franchised dealerships and independent garages to fleet operators and vehicle rental companies, meaning qualified technicians have options across a wide variety of business sizes and settings.
79 approved providers
Sorted by achievement rate.
Southport College is a centre of technical excellence and a leading provider of vocational and techn...
Bath College is a further education provider offering a wide range of vocational and technical train...
London South East Colleges is a further education college group delivering a wide range of technical...
Nottingham College is a general further and higher education college based in Nottingham, offering a...
New College Swindon is a further and higher education college offering a broad apprenticeship and pr...
MidKent College is a further education provider serving Medway, Maidstone and the wider Kent area, w...
Suffolk New College is a further education provider offering a wide range of apprenticeship and skil...
Activate Learning is a UK education group that delivers apprenticeships and vocational training thro...
ProVQ is an independent UK training provider specialising in high-quality, work-based learning for t...
Skills Group is an independent training provider with over 25 years’ experience delivering apprentic...
Shrewsbury College, part of Shrewsbury Colleges Group, offers one of the largest and most flexible f...
Petroc is a further and higher education college in Devon offering an extensive apprenticeship portf...
Lancaster Training Services Ltd is a specialist training provider based at The Training Centre, 5 Pe...
Windsor Forest Colleges Group is a dynamic group of colleges offering first-class education and trai...
City of Portsmouth College is a further education college with four campuses across Portsmouth – Aru...
S&B Automotive Academy is a specialist apprenticeship and training provider focused on the automotiv...
Warwickshire Garage & Transport Group Training Association Limited (WGTA) is a specialist automotive...
Career outcomes
Roles after completion
Completing this standard typically leads to a qualified Light Vehicle Technician or Vehicle Service Technician position within a workshop. Apprentices are competent to carry out scheduled servicing, diagnostics, brake and suspension work, and engine repairs without direct supervision. Some move into an MOT Tester role once they obtain the relevant DVSA authorisation, while others step into a Workshop Technician position at a main dealer or independent garage.
Progression paths
Within three to five years, many technicians progress to Senior Technician or Master Technician, taking on complex diagnostics and mentoring newer staff. Some move into Service Advisor or Workshop Controller roles, shifting towards customer-facing and operational responsibility. Longer term, the paths split clearly: technical specialists pursue manufacturer-level diagnostic accreditations and electric vehicle qualifications, while those with leadership ambitions move into Workshop Foreman, Service Manager, or even Garage Owner positions.
Where these roles sit
Employers span franchised main dealers representing volume and premium brands, independent garages, fast-fit chains, and fleet maintenance operations run by logistics companies, local authorities, and emergency services. The sector is largely private, though local government vehicle depots and NHS trust fleets also employ qualified technicians. Workshops of every scale hire at this level, from single-site independents with a handful of bays to national dealer groups with multiple locations.
How it's assessed
How the apprenticeship is assessed
Throughout the apprenticeship, learners work in a real workshop environment, building competence in servicing and repairing light vehicles alongside their studies. Assessment is ongoing rather than a single event at the end of the programme. Before final assessment, the apprentice must pass a readiness check, often called a gateway, where their employer and training provider confirm they have the knowledge, skills and behaviours needed to complete. Final assessment then verifies that the apprentice can perform the role to the required standard. Assessment arrangements for many standards are currently being updated, so check the gov.uk standard page for the current specification.
What learners need to prepare
Practical evidence is central to this type of assessment. Learners should keep detailed records of the vehicles worked on, the faults diagnosed, and the tasks completed throughout the programme, rather than trying to compile evidence late in the apprenticeship. Regular reviews with the employer and training provider help identify any gaps in competence early enough to address them. Treating each job in the workshop as a potential evidence opportunity from day one makes the final stages of the apprenticeship significantly more straightforward.
Choosing a provider
What good looks like
Look for providers with an achievement rate above 65% on their FATP profile; above 75% is strong for a practical standard where learners need to complete both knowledge assessments and an end-point assessment that includes a live vehicle inspection and practical tasks. Employer satisfaction scores matter here because this standard lives or dies on workplace integration. Check whether the provider has dedicated workshop facilities for off-the-job training, works with manufacturers or franchise dealer groups, and can show learners progressing into qualified technician roles after completion.
Red flags to watch for
Be cautious if a provider has high learner volumes but a declining achievement rate, which can signal learners being enrolled without sufficient employer support in place. Vague answers about what happens during off-the-job training sessions are a concern: for this standard, that time should involve real vehicles, diagnostic equipment and current manufacturer systems, not just classroom theory. Providers unable to confirm their workshop equipment is regularly updated, or who cannot name the diagnostic platforms they train on, are worth questioning hard.
Questions to ask before you commit
- What diagnostic tools and manufacturer systems do learners train on during off-the-job sessions, and how recently was the equipment updated?
- How do you structure the 36-month programme to prepare learners for the end-point assessment's practical vehicle inspection element?
- What is your current achievement rate for this standard, and how has it trended over the past two years?
- Do you have experience working with employers in our specific context, whether that is a franchise dealer, independent garage or fleet operator?
- How many learners are currently on this standard with you, and what is the typical cohort size?
- What support is in place if a learner struggles with the technical theory elements alongside practical work?
- Can you share examples of where previous completers have progressed within their employer after qualifying?
Common questions
What entry requirements do employers and learners need to meet for this apprenticeship?
There are no nationally mandated entry qualifications, but most employers look for a genuine interest in vehicle mechanics and some basic numeracy and literacy. Individual providers may set their own entry criteria, such as GCSEs in maths and English or equivalent qualifications. Learners must be employed in a relevant role for the duration of the apprenticeship, working on light vehicles such as cars and vans in a workshop environment.
How long does this apprenticeship take and how is the time split between work and study?
The typical duration is 36 months. Apprentices remain employed throughout and complete off-the-job training alongside their normal duties, meaning learning happens in a real workshop from day one. The exact off-the-job training requirement is subject to current government reforms, so check the latest specification on the Institute for Apprenticeships and Technical Education website at gov.uk for the figures that apply when you enrol.
How is the apprenticeship assessed and what is the end-point assessment?
Before taking the end-point assessment, apprentices must pass through a gateway, where the employer and training provider confirm the apprentice has met all the required knowledge, skills and behaviours. The end-point assessment then tests competence, typically through a combination of practical observation, a knowledge test and a professional discussion. Assessment models for some standards are being reviewed, so check the current specification on gov.uk to confirm the exact components.
How does an employer pay for this apprenticeship and what does it cost?
The funding band for this standard is £16,000, which is the maximum government contribution towards training costs. Levy-paying employers draw directly from their digital apprenticeship service account. Non-levy employers co-invest with the government, paying a small percentage of the training cost. Employers with fewer than 50 employees who take on a 16 to 18-year-old apprentice pay nothing toward the training costs. In all cases, the employer continues to pay the apprentice's wages.
What does a light vehicle technician apprentice actually do during the working day?
Day-to-day work involves carrying out scheduled servicing, diagnosing faults using diagnostic equipment, replacing worn components, and carrying out MOT preparation work. Apprentices work on braking systems, engines, transmission, steering and electrical systems across a range of cars and light vans. They learn to follow manufacturer procedures, use technical information systems, and complete the documentation that goes with every job, working under supervision that reduces as competence builds.
What can an apprentice go on to do after completing this apprenticeship?
Qualified technicians can progress into senior or master technician roles, specialising in areas such as electric and hybrid vehicle systems, diagnostics or bodywork. Some move into service advisor or workshop controller positions, while others pursue further qualifications such as an MOT tester licence or manufacturer-specific training programmes. Experienced technicians with the right background can also work toward management roles or set up their own vehicle servicing operation.
Not sure which provider fits?
Tell us a bit about your team and we'll send a shortlist.
Need help choosing a provider?
Tell us your requirements and we'll match you with the right training providers.
Curated by Alex Lockey, FATP founder and editor. Last reviewed: .
Sources include the apprenticeship's official specification on apprenticeships.gov.uk, Skills England guidance, IfATE archive records, DWP funding bands, and provider data sourced directly from the public Apprenticeship Provider and Assessment Register (APAR). Standard reference: 59.
Some sections on this page were drafted with AI assistance from published source data and reviewed by a human editor before publication. See our editorial methodology for how we maintain this content. Spotted something out of date? Tell us.